|
|
Line 347: |
Line 347: |
| *'''Temperature Gate''': Prevents gases from flowing through if the gases on the input side are either above or below the set temperature. You can use a multitool to change whether it lets gases above/below the set temperature through. | | *'''Temperature Gate''': Prevents gases from flowing through if the gases on the input side are either above or below the set temperature. You can use a multitool to change whether it lets gases above/below the set temperature through. |
| *'''Temperature Pump''': Moves heat from one connected pipeline to the other. Sorta like using heat exchangers, but smaller and less efficient. | | *'''Temperature Pump''': Moves heat from one connected pipeline to the other. Sorta like using heat exchangers, but smaller and less efficient. |
| *'''Relief Valve''': A valve that automatically opens at a certain pressure. Useful for preventing overpressure in a pipe net (such as during a plasmafire). | | *'''Relief Valve''': A valve that automatically opens at a certain pressure. Useful for preventing overpressure in a pipe net (such as during a plasmafire). The unary version opens to the environment, and the binary version opens to another pipenet. |
|
| |
|
| '''Heat Exchange:''' | | '''Heat Exchange:''' |
Revision as of 19:10, 24 January 2022
Currently working on an engineering items page, and fixing dead links.
Items
ATMOS holofan projector
|
Found in: Atmospheric technician's locker Used for: Cordoning off hull breaches and plasma floods Strategy: Quickly stop local gas floods and prevent hull breaches from sucking all the oxygen out of a room.
|
Description
|
This projects holograms that block gases, but let objects pass. Easily your most effective tool to deal with emergencies - quickly seal hull breaches, stop gas floods and fires from spreading or even create a safe cloning/surgery room for Plasmamen.
|
|
Rapid Piping Device
|
Found in: Atmospheric technician's locker, Engineering Techfab Used for: Laying down pipes. Strategy: The RPD is the tool required to build elaborate pipenets.
|
Description
|
This tool made the pipe dispensers irrelevant. Used to build virtually any type of pipes (except chemistry pipes), it does not have a charge unlike the RCD and can place anything atmos related on all three layers. The first thing you should do as an atmos tech is grabbing or printing one. You can also use it to place disposals pipes and transit tubes.
|
|
Analyzer
|
Found in: Atmospheric technician's locker, Engineering Techfab, Engivends. Used for: Analyzing the content of pipes and devices or the atmosphere of the tile you're on. Strategy: Used to get information.
|
Description
|
The eyes of the atmos technician. It gives information about pressure, composition and the temperature of any gas mix you're interested in. However, it has no range at all, you need to be right next to the pipe you want to analyze. Note that the atmospheric technician's PDA has the analyzer features built into it.
|
|
Fire Extinguisher
|
Found in: Extinguisher Lockers, Xenobiology Used for: Extinguishing fires and the lives of unaware command staff, ghetto jetpacks Strategy: A fire extinguisher will spray water across the room to put out fires or change your direction in space
|
Description
|
This has multiple uses, from ghetto space travel to rocketing yourself down a hallway strapped to a wheeled chair, even to its intended purpose. Easily the best weapon against Slimes. A Chaplain can bless the water in a fire extinguisher to bless an entire stretch of hallway at once. Will need refilling at a Water Tank.
Holds 50 units of water, or whatever else you put into it.
|
|
Backpack Firefighter Tank
|
Found in: Atmospheric Technician's locker, Atmospheric Hardsuit container Used for: Extinguishing fires and removing hot toxic air from rooms. Strategy: It has three modes,fire extinguisher mode, resin foamer mode to cover one tile in resin, resin launcher mode to cover a larger area in resin.
|
Description
|
This backpack is used to fight dangerous fires without having to space a room. The resin will remove toxic and hot gas from the tile it is covers, making the backpack a great way to purge a room from bad air efficiently. Note however that the resin launcher needs to be refilled by 100u of water after each uses, and that it doesn't work like a scrubber. Yes, you need to cover EVERY single tile relevant with resin for the room to be purified.
|
|
Miniature Fire Extinguisher
|
Found in: Emergency Toolboxes Used for: Putting out small fires, ghetto jetpacks Strategy: A fire extinguisher will spray water across the room to put out fires or change your direction in space
|
Description
|
Functionally the same as a normal fire extinguisher, but has a smaller capacity and can fit into your pockets. Will need refilling at a Water Tank.
Holds 30 units of water, or whatever else you put into it.
|
|
Fire axe
|
Found in: Atmospherics Used for: Burglary and homicide, slipping and having the Clown steal it Rescuing people from locked rooms Strategy: Quickly smash airlocks, windows and grilles. Pry things open.
|
Description
|
This Atmosian heirloom is excellent for quickly getting to the plasma fire that needs to be extinguished. Often the only reason anyone visits Atmospherics - in the wrong hands the axe is great for both burglary and robusting people.
Don't be THAT GUY who walks around with the axe out for no reason. Can be attached to the backs of hardsuits.
|
|
Emergency Oxygen Tank
|
Found in: Atmospherics Office, Emergency Lockers, Internals Box Used for: As the name suggest, used as an emergency oxygen supply. It's not a question about if you need it, it's a question of when you need it, keep one with you at all time Strategy: Stuff it in your pocket, belt, or suit slot and leave it there, you'll need it
|
Description
|
A small oxygen tank that you can wear in your belt slot or in the suit slot of various suits. It is typically kept at approximately 16 kPa, which provides just enough oxygen for you to breathe in.
Oxygen tanks of all sizes can be filled by Atmospheric Technicians and are used with a breath mask to set up an internal air supply. Can be filled to 1013 kPa, unless you get creative.
|
|
Description
|
An oxygen tank with a large capacity and a much slower oxygen consuming rate. A must for miners who like to stay in space for long times.
Can be filled to 1013 kPa, unless you get creative. Can be attached to the back of hardsuits.
|
|
Plasma Internals Tank
|
Found in: Plasmamen, Plasmaman Supply Kit Used for: Used as a personal supply of plasma gas for plasmamen. Strategy: Put it in one of your pockets and leave it there.
|
Description
|
Each plasmaman joins the shift breathing from one of these tanks in their right hand. This plasma tank is able to fit in the belt or pocket slot, but it can also go on the suit storage slot of a space suit or hardsuit. Its volume is much greater than emergency oxygen tanks, but you'll still need to refill it during longer shifts.
|
|
Atmospherics Gear
Equipment
Air Alarm
|
Found in: Every room with atmospherics Used for: Sniffing the atmospheric status near it, sending alerts if something isn't right and controlling the room's vents and scrubbers Strategy: Install it in a room wall and it'll find the vents and scrubbers in the room automatically
|
|
Fire Alarm
|
Found in: Every room Used for: Automatically closes the fire doors in case of fire Strategy: Pull leaver to close down an area so only people with Crowbars can leave
|
Description
|
Used to toggle all fire doors in an area. Can be quickly toggled by shooting at it with a taser or also by hitting with a melee weapon.
Guide to building a Fire Alarm.
|
|
Description
|
Immovable dispenser filled with 10 oxygen tanks and 10 plasma tanks (except the ones located in E.V.A. and Mining Station have only oxygen tanks).
|
|
Description
|
When new and before use, or when almost fully emptied, a label can be selected from its interface. This will change its color to indicate what it may contain (or fooling people into thinking it contains Oxygen and not Plasma)
Can be made with 10 sheets of Metal.
|
|
Portable Pump
|
Found in: Locker Room, Atmospherics, Hallway outside the Atmospherics office Used for: Filling a room with air. Can also be use to suck the air out of a room Strategy: Set the pump direction to out, set your target pressure (most likely 101.3 kPa), turn it on, and it re-pressurizes a room until its air runs out
|
Description
|
Out with the good air. It both sucks and blows. Be sure to connect it to the blue ports outside Atmospherics to fill it up with delicious air mix beforehand.
|
|
Description
|
In with the bad air. Flip it on to filter out the bad gases very slowly. Connect it to the red ports outside Atmospherics to empty it out once it's full. Make sure you also re-fill the area with clean oxygen.
|
|
Description
|
Made by the Space Amish, it can reliably heat up a room to livable temperature. Uses a Power Cell to function. All Space Heaters come default with a 1000 watt power cell -- keep it in mind if you need a free cell.
|
|
Pipe Dispenser
|
Found in: Atmospherics Used for: Making pipes and pumps Strategy: It is still possible to dispose of pipes and pumps into it when it's in movable-mode
|
Description
|
Using a Wrench will toggle it between movable- or dispensing-mode.
When in dispensing-mode and in a powered room, it can dispense pipes and pumps for use.
You are able to dispose of unwanted pipes and pumps by using them on the Pipe Dispenser.
[Show/hide] Dispensable Items:
Pipes:
- Regular pipes: Your standard pipes, used for connecting all your atmospherics machines. These can be straight pipes, curved pipes, 3-way manifolds, and 4-way manifolds.
Devices:
- Connector: Used to attach canisters, pumps or scrubbers to a pipe network. If you can't get a pipe network easily to the filter loop, an empty canister can be a good substitute.
- Unary vent - See: Vent. Once placed down it will have to be turned on by activating it at an Air alarm terminal.
- Injector: Sort of like a vent, except it works off of volume and constantly injects gases. Good for open-turf air tanks.
- Gas pump: The basic pumps you'll find all over Atmospherics. Good for precise pressure levels. Goes up to 4500 kPa.
- Passive gate: Think of it as a one-way manual valve, but electronic. Doesn't pump gas, but lets certain pressure through. Can let up to 4500 kPa pressure through. It should be noted that its on status can be easy to miss, being just a small red/green light.
- Volume pump: A bit like the gas pump, but pumps via volume rather than going for pressure. 200 l/s (~9000 kPa) is its max output. Faster than a gas pump (you can fill canisters up past the standard 4500 kPa pressure!), so best used in systems where precise pressure isn't needed (such as anything to do with the waste loop).
- Scrubber: Self explanatory, scrubs the nasty out of things, or acts like a vacuum. Like unary vents, needs to be turned on by an Air alarm terminal after wrenched into place.
- Meter: Wanna know how much gas (and its temperature) is in a pipe? Use these.
- Gas Filter: Them big ol' blocks of things that ring Atmosia, takes certain gasses out. Filters them, if you will.
- Gas Mixer: Like a filter, but mixes gasses instead of filters. There is one in Atmosia that mixes nitrogen and oxygen.\
- Temperature Gate: Prevents gases from flowing through if the gases on the input side are either above or below the set temperature. You can use a multitool to change whether it lets gases above/below the set temperature through.
- Temperature Pump: Moves heat from one connected pipeline to the other. Sorta like using heat exchangers, but smaller and less efficient.
- Relief Valve: A valve that automatically opens at a certain pressure. Useful for preventing overpressure in a pipe net (such as during a plasmafire). The unary version opens to the environment, and the binary version opens to another pipenet.
Heat Exchange:
- Pipes: H/E pipes transfer temperatures between the environment and the gases within the pipe. This can be used to heat gases in a pipe quickly, or when combined with freezers/heaters and a high heat capacity gas it can be used to cool/heat a room quickly.
- Junction: This pipe allows you to connect regular pipes to heat exchange pipes.
- Heat Exchanger: These strange and esoteric devices equalize the temperature between two pipe networks without actually mixing the gasses. To use, place them facing each other.
|
|
Disposal Pipe Dispenser
|
Found in: Atmospherics Used for: Making disposal pipes and other disposal equipment. Mostly used for repairs or making experimental transit-systems Strategy: Dispose of the entire waste system extra pipes you dispense by dragging them onto the disposal unit
|
Description
|
Using a Wrench will toggle it between movable-mode and dispensing-mode.
When in dispensing-mode and in a powered room, it can dispense pipes and other disposal equipment for use.
Despite not being able to pick them up with your hands, you can drag the pipe onto the dispenser to dispose of extras.
See information here how to modify the existing ones or make your own disposal pipes.
|
|